Emerson Automation Solutions :Product Range
VanessaTriple Offset Valve
VANESSA™
Handling isolation and process control through multiple functionalities with long life expectancy, minimum maintenance requirements and generating lower cost of ownership to the customer compared to traditional gate, ball and other valve designs. Vanessa Series 30,000 exclusively features an integral-to-body seat and Stellite® grade 21 weld overlays are applied on seats to achieve higher resistance to galling, abrasion, erosion & corrosion
Applications
On-Off
Every Vanessa valve is designed to provide full tightness at the maximum rated pressure in both sealing directions.
High frequency / switching
The Vanessa triple offset, non-rubbing design completely eliminates wear between sealing components. The entire trim, including bearings and thrust bearing, is designed for heavy duty use. The valve is suitable for high frequency open/close cycles such as found in the molecular sieve process, where Vanessa valves have been used effectively for many years.
Flow Control
As a quarter turn triple offset valve with a throttling trim, the Vanessa Series 30,000 delivers top performance in flow control functions.
Emergency Shutdown (ESD)
With the correct material and actuator selection, Vanessa valves offer intrinsically higher safety integrity levels (SIL) in critical services including shut down, non return, bypass blow off/blow down and vent. In the preferred sealing direction of the valve, the pressure tends to keep the valve closed, allowing safer functioning during emergency shutdowns.
Configuration
Basic Configuration
Cryogenic
Series 30,000 cryogenic valves feature an extended bonnet, which meets the requirements of BS 6364, and are constructed from materials carefully selected to match pipe specification and project requirements while also being unaffected by cryogenic conditions and severe temperature fluctuations.
Cryogenic Buttweld Top Entry
When an inline maintenance capability is mandatory, this design allows for access without removing the valve body from the line. The entire valve trim can be removed from the body and individual valve parts can be accessed in total safety.
High Temperature
The high temperature configuration is suitable for applications up to 815 °C (1500 °F). The valve is designed to compensate for the thermal expansion of components and to withstand material creep at temperatures over 600 °C (1112 °F).
Molten Salt
Specifically designed for solar power generation applications. The buttweld body style is extremely compact, fully integrates with the pipeline and significantly reduces thermal dissipation, simplifying the piping insulation design.
KTM & AEVBall Valve
KTM™
KTM Ball Valves have more than 90 years of experience in providing premium manual and automated ball valves. KTM pioneered full-bore, split-body ball valves as well as soft-seated and metal-seated ball valve technologies.
The product range includes:
- Process Floating Ball Valves
- Trunnion-Mounted Ball Valves
- Metal-Seated Ball Valves
- High-Speed Powder Discharge Ball Valves
KTM Ball Valves are designed for a wide range of applications in the chemical, petrochemical, oil & gas, and process industries, offering reliable performance for demanding service conditions.
BALL VALVES & ACTUATOR
EB1 Series
Floating Type
- Size
- Full BoreDN 15 to DN 200(NPS ½ to NPS 8)Reduce BoreDN 150 to DN 250(NPS 6 to NPS 10)
- Pressure Rating
- ASME Class 150 - 1500JIS 10K, 20K
E01 Series
Trunnion Type
- Size
- Full BoreDN 40 to DN 600(NPS 1½ to NPS 24)Reduce BoreDN 80 to DN 500(NPS 3 to NPS 20)
- Pressure Rating
- ASME Class 150 - 1500
MB1 Series
Three Way 4 Seats | L and T Port
- Size
- Full BoreDN 15 to DN 300(NPS ½ to NPS 12)Reduce BoreDN 125 to DN 350(NPS 5 to NPS 14)
- Pressure Rating
- ASME Class 150 - 600JIS 10K, 20K, 40K
NB1 Series
Three Way 2 Seats | L Port
- Size
- Full BoreDN 40 to DN 350(NPS 1½ to NPS 14)Reduce BoreDN 125 to DN 350(NPS 5 to NPS 14)
- Pressure Rating
- ASME Class 150 - 600JIS 10K, 20K, 40K
PDS Series
Powder Discharge System
- Size
- DN 15 to DN 350(NPS ½ to NPS 14)
- Pressure Rating
- ASME Class 150 - 600
ACTUATOR
Pneumatic Actuators
- Model
- AK SeriesAG SeriesAW Series
KTM™K-BALL
KTM K-Ball portfolio offers a comprehensive range of valves ideal for general industrial and service applications including water, oil, gas and chemical processes.
Certain models also offer designs suitable for more hazardous services such as fuel and inflammable substances.
K-BALL VALVES
Series 110
One Piece, Reduce Bore
- Size
- DN 8 to DN 50(NPS 1/4 to NPS 2)
- Pressure Rating
- PN 69, 1000 psi
- End Connection
- Threaded Ends
Series 120
Two Piece, Full Bore
- Size
- DN 8 to DN 50(NPS 1/4 to NPS 2)
- Pressure Rating
- PN 69, 1000 psi
- End Connection
- Threaded Ends
Series 115
Three Piece, Swing Out
- Size
- DN 8 to DN 100(NPS 1/4 to NPS 4)
- Pressure Rating
- Class 300Class 400 / 1000psi
- End Connection
- Threaded, Butt Weld, Socket Weld
Series 174
Three Piece, Full Bore
- Size
- DN 8 to DN 100(NPS 1/4 to NPS 4)
- Pressure Rating
- Class 300Class 400 / 1000 psi
- End Connection
- Threaded, Butt Weld, Socket Weld
Series 188
Three Piece, Full Bore
- Size
- DN 8 to DN 50(NPS 1/4 to NPS 2)
- Pressure Rating
- Class 600 / 1500 psigClass 800 / 2000 psig
- End Connection
- Threaded, Butt Weld, Socket Weld
Series 194
Two Piece, Full Bore
- Size
- DN 15 to DN 200(NPS 1/2 to NPS 8)
- Pressure Rating
- Class 150 - 300PN 10/16/25/40
- End Connection
- Flanged
AEV™
A double eccentric C-ball valve is similar in principle to a conventional ball valve, but with a half ball that makes a “C” shape. This C-shaped ball rotates on two planes of motion with energy from the stem to close and seal against a fixed seat.
AEV design provides superior sealing performance, eliminates the problematic conventional ball valve cavity and lasts longer with an open and closing action that is contactless until the point of sealing.
DOUBLE ECCENTRIC C-BALL VALVES
2XCᵀᴹ Cryogenic
Double Eccentric C-Ball
- Size
- DN 15 - 750(NPS ½ - 30)
- Pressure Rating
- ASME Class 150 - 4500PN 10 - 400
2XCᵀᴹ Severe Service
Double Eccentric C-Ball
- Size
- DN 15 - 750(NPS ½ - 30)
- Pressure Rating
- ASME Class 150 - 4500PN 10 - 400
KeystoneButterfly Valve, Check Valve & Knife Gate Valve
RESILIENT SEATED BUTTERFLY VALVE
Emerson’s range of Keystone resilient seated butterfly valves provide long service life and bubble tight shutoff. These valves deliver a high cycle life with lower your total cost of ownership.
A resilient seated butterfly valve (RSBFV) is mounted between the pipe flanges and contains a rubber seat. The disc is rotating in an angle of 90 degrees (quarter turn) from full closed to fully open. RSBFV can be used for on-offor flow control duties in gas, steam, liquid or slurry applications.
Resilient Seated Product
Figure 221/222
- Size
- DN 50-600 (NPS 2-24)
- Pressure Rating
- 16 bar (232 psi)
Figure 320/322
- Size
- DN 50-300 (NPS 2-12)
- Pressure Rating
- 16 bar (232 psi)
CompoSeal
- Size
- DN 40-300 (NPS 1½-12)
- Pressure Rating
- Up to 16 bar (232 psi)
Series GR (Wafer & Lugged)
- Size
- DN 50-900 (NPS 2-36)
- Pressure Rating
- Up to 16 bar (232 psi)
Figure 990/920
- Size
- DN 25-500 (NPS 1-20)
- Pressure Rating
- Up to 10 bar (145 psi)
OptiSeal
- Size
- DN 40-300 (NPS 1½-12)
- Pressure Rating
- Up to 16 bar (232 psi)
Figure 1/2
- Size
- DN 50-1000 (NPS 2-40)
- Pressure Rating
- Up to 10 bar (145 psi)
Figure 129/139
- Size
- DN 50-500 (NPS 2-20)
- Pressure Rating
- 14 bar (203 psi)
ParaSeal
- Size
- DN 50-2400 (NPS 2-96)
- Pressure Rating
- 25 bar (360 psi)
Figure 627PQ
- Size
- DN 350-1400 (NPS 14-56)
- Pressure Rating
- 16 bar (230 psi)
HIGH PERFORMANCE BUTTERFLY VALVE
Emerson Keystone high performance butterfly valves provide tight sealing despite pressure and temperature changes or the existence of particulate in the process media. These valves are designed with premium materials to deliver a long service life, no matter the conditions.
- A High Performance Butterfly Valve (HPBFV) is used where the pressures or temperature exceeds the capability of a RSBFV or where there is a significant amount of cycling of the valve.
- They utilize an eccentric design which incorporates a double offset disc. This allows for less rubbing resulting in greater cycle life.
- High Performance Butterfly Valves provide excellent shutoff, increased cycle life, small envelope dimensions, and an economical alternative to gates and globes for both isolation and control
High Performance Product
K-LOK® Series 36/37
- Size
- DN 50-600 (NPS 2-24)
- Pressure Rating
- ASME Class 150-300
K-LOK® Series 36/37 ISO
- Size
- DN 50-300 (NPS 2-12)
- Pressure Rating
- PN 10/16, 25/40
K-LOK® Figure 360/362 and 370/3722
- Size
- DN 50-900 (NPS 2-36)
- Pressure Rating
- ASME Class 150-300
K-LOK® Series 38
- Size
- DN 50-400 (NPS 2-16)
- Pressure Rating
- PN 10, 16, 25
Series HiLok
- Size
- DN 50-900 (NPS 2-36)
- Pressure Rating
- Up to 40 bar (580 psi)
Series WINN HiSeal
- Size
- DN 50-1200 (NPS 2-48)
- Pressure Rating
- ASME Class 150-300
Check Valve Product
Figure 85
Wafer Style Swing Check
- Size
- DN 40-300 (NPS 1½-12)
- Pressure Rating
- 16 bar (230 psi)
Figure 86
Spring Loaded Swing Check
- Size
- DN 50-300 (NPS 2-12)
- Pressure Rating
- 16 bar (230 psi)
Ask about Keystone Butterfly Valve, Check Valve & Knife Gate Valve
SempellGate Valve, Globe Valve, Check Valve
Wedge Gate
Emerson’s wedge gate valve range covers forged and cast design for dependable on-off isolation in high pressure steam, water and process systems. The closure element moves perpendicular to the flow and uses a wedge profile to create tight contact with the body seats. Flexible and split-wedge designs help accommodate temperature changes and seat alignment. Pressure-seal bonnets are used for demanding pressure/temperature service, while bolted-bonnet configurations cover more general process duties. Typical applications include main steam, reheat steam, boiler feedwater, oil & gas and petrochemical isolation.
Sempell Fasani Style B
- Type
- Cast Wedge Gate
- Design
- Pressure Seal
- Size
- NPS 2 to 24
- ASME Class
- #600 to #2500
Sempell Raisteam GA250
Fig. 6012-6015
- Type
- Forged Wedge Gate
- Design
- Pressure Seal
- Size
- NPS 2 to 30
- ASME Class
- #900 to #4500
Sempell Fasani Style A
- Type
- Cast Wedge Gate
- Design
- Pressure Seal
- Size
- NPS 2 to 24
- ASME Class
- #900 to #2500
Hancock 600 Series
- Type
- Cast / Forged Wedge Gate
- Design
- Bolted Bonnet
- Size
- NPS 1/2 to 2 for FogedNPS 2 to 24 for Cast
- ASME Class
- #800 to #1500 for Forged#150 to #600 for Cast
Parallel Slide Gate
Parallel-slide gate valves use two parallel discs rather than a wedging element. Line pressure and spring force maintain contact between the discs and seats, providing isolation without forcing a wedge deeper into the body seats.
This design can reduce operating force, minimize pressure drop and help avoid thermal binding in steam and water systems exposed to temperature cycling. Typical applications include main steam, feedwater, boiler feed pump, feedheater and spray-water service.
Sempell Dewrance P67-P95
- Type
- Parallel Slide Cast Gate with eyelet follower design
- Design
- Pressure Seal
- Size
- NPS 5 to 24
- ASME Class
- Up to #2850
Sempell Raisteam GA254-GA255
Fig. 6112-6115
- Type
- Parallel Slide Forged Gate
- Design
- Pressure Seal
- Size
- NPS 2-1/2 to 30
- ASME Class
- Up to #4500
Sempell Dewrance P91R
- Type
- Parallel Slide Forged Gate with eyelet follower design
- Design
- Pressure Seal
- Size
- NPS 5 to 24
- ASME Class
- Up to #2850
Globe Valve Small Bore
Emerson designs high quality globe valves which combine tight isolation with regulating service where required. Manufactured using carefully selected cast and forged steels and with selected face-hardened components, they are ideal for demanding applications requiring reliable performance in more extreme operating conditions.
T-pattern globe type are used for vents, drains, bypass systems and warm up lines where reliable shutoff is requires. Emerson Sempell VA400, VA500, VA510 and VA540 cover progressively higher pressure/temperature duties in compact forged designs.
Sempell VA400 Series
- Type
- T-Pattern
- Design
- One-Piece Forged Body
- Size
- NPS 3/8 to 2-1/2
- ASME Class
- #900 to #2680
Sempell VA510 Series
- Type
- T-Pattern Forged Body
- Size
- NPS 3/8 to 2-1/2
- ASME Class
- Up to #3600
Sempell VA500 Series
- Type
- T-Pattern
- Design
- One-Piece Forged Body
- Size
- NPS 3/8 to 2-1/2
- ASME Class
- #1690 to #2680
Sempell VA540 Series
- Type
- T-Pattern Forged Body
- Size
- NPS 2-1/2 to 3
- ASME Class
- #1690 to #2680
Globe Valve Multi Pattern
Larger Sempell globe valves are available in T, Y and Angle-Pattern configurations for main/reheat steam, feedwater and general isolation service. Pressure-seal bonnet construction supports severe high-pressure applications
Sempell Raisteam VA250
Fig. 6022-6025, 6032-6035
- Type
- T, Y, and Angle Pattern
- Design
- Pressure Seal
- Size
- NPS 2-1/2 to 26
- ASME Class
- Up to #4500
Hancock 600 Series
- Type
- T-Pattern Cast / Forged Body
- Design
- Bolted Bonnet, Welded Bonnet
- Size
- NPS 2 to 24 for CastNPS ½ to 2 for Forged
- ASME Class
- #150 to #600 for Cast#800 to #1500 for Forged
Sempell Style A
- Type
- T and Y-Pattern
- Design
- Pressure Seal
- Size
- NPS 2 to 12 for T-PatternNPS 3 to 24 for Y-Pattern
- ASME Class
- #1500 to #2500 for Y-Pattern#600 to #2500 for T-Pattern
Check Valve
Emerson Sempell Check Valve prevent reverse flow in high pressure steam and water systems. The range includes compact piston check valve, forged swing or tilting disc pressure seal valves, and cast swing or tilting disc designs for main steam and feedwater service.
Sempell Raisteam KR400
Fig. 6042-6045
- Type
- Forged Steel Swing Check and Tilting Disc
- Size
- NPS 2-1/2 to 30
- ASME Class
- Up to #4500
Sempell VR500
- Type
- Forged Steel Piston Check
- Size
- NPS ½ to 2-1/2
- ASME Class
- #1690 to #2680
Sempell Dewrance F67-F95
- Type
- Cast Tilting Disc
- Size
- NPS 6 to 24
- ASME Class
- Up to #2685
Sempell Fasani Style B
- Type
- Cast Steel Swing Check and Tilting Disc
- Size
- NPS 2 to 24
- ASME Class
- Up to #2850
Hancock 600 Series
- Type
- Cast / Forged Swing Check
- Size
- NPS 2 -24 for CastNPS ½ - 2 for Forged
- ASME Class
- #150 - #600 for Cast#800 - #1500 for Forged
Bled Steam Check Valve (BSCV)
Emerson designs and manufactures specialist valve to protect critical applications in the generation of steam including bled steam check valves for the protection of steam turbines. Pneumatic, Hydraulic or Electric assisted check valve to increase the speed of the disc while closing. Highly customized according to the line conditions. Bolted bonnet check valve. Free swing standard design. Special design forced to open. Reduce bore available. Top mounted and side mounted.
Sempell Side Mounted
- Type
- Cast Steel Swing Check
- Size
- NPS 3 to 32
- ASME Class
- #400 to #900
Sempell Fasani Side Mounted
- Type
- Cast Steel Swing Check
- Size
- NPS 6 to 12NPS 12 to 60
- ASME Class
- #900 to #1500 for NPS 6 to 12#150 to #600 for NPS 12 to 60
Sempell Dewrance Top Mounted
- Type
- Cast Steel Tilting Disc
- Size
- NPS 6 to 24
- ASME Class
- #150 to #600
SempellSafety Valve
Background and Summary
Safety Valve
Emerson’s safety relief valves provide dependable overpressure protection for a wide range of applications, including steam, process, and extreme-service conditions. With extensive material, connection, and configuration options, Emerson delivers safety valve solutions designed, certified, and tested in accordance with major international codes and standards, including ASME I & VIII, API, PED, EN, AD-2000, CU-TR, TÜV, SELO, and LRS.
Success Story
Successfully supplied a replacement Electro-Pneumatic Relief Valve (EPRV) for a boiler application. The valve provides power-actuated relief protection, automatically opening through its control system at a pressure below the set pressure of the primary safety valve, while also enabling DCS-initiated steam relief during boiler start-up and sliding-pressure operation.
Pacitan-2025
General Application
Type S
- Sizes
- DN 25x50 to 200x250[1"x2" to 8"x10”]
- Temperature Range
- -268 to +700°C[-450 to 1300°F]
- Set Pressures
- 1 to 427 barg[15 to 6,200 psig]
- Connections
- ANSI 150# to 2,500#,DIN PN10 to 400,EN Welded connections
Type MAXI S
- Sizes
- DN 250 to 600[10" to 24”]
- Temperature Range
- -50 to +700°C[-58 to 1300°F]
- Set Pressures
- 0.3 to 24 barg[4 to 350 psig]
- Connections
- Flanges DIN, EN or ANSIWelded connections
Type Mini S
- Sizes
- DN 15x25 to 25x25[½"x1" to 1"x1”]
- Temperature Range
- -200 to +200°C[-330 to 390°F]
- Set Pressures
- 1 to 52 barg[15 to 750 psig]
- Connections
- Threaded Flanges DIN,EN or ANSI
Type Mini S
- Sizes
- DN 15x25 to 25x25[½" x 1" to 1" x 1”]
- Temperature Range
- -196 to +205°C[-320 to 400°F]
- Set Pressures
- 1 to 440 barg[15 to 6,400 psig]
- Connections
- Threaded Metric, NPTFlanges DIN, EN or ANSI
Critical Steam
Type SOH / SOT
TÜV type-tested to PED & EN4126-5
- Sizes
- SOH: DN 80 to 300 - 3” to 12”SOT: DN 150 to 600 - 6” to 24”
- Temperature Range
- Up to 700°C[1,300°F]
- Set Pressures
- 10 to 500 barg[145 to 7,250 psig]
- Connections
- Flanges, ANSI or DIN/ENButt-welded inlet and outlet
Type EPRV
Certified per ASME I.
- Sizes
- DN 65 x 100[2½" x 4”]with 3 different nozzle sizes available
- Temperature Range
- Up to 700°C [1,300°F]
- Set Pressures
- Up to 500 barg[7,250 psig]
- Connections
- Flanges, ANSI or DIN / ENButt-welded inlet and outlet
ClarksonKnife Gate Valve
CLARKSON KNIFE GATE VALVE
Emerson’s knife gate valves are designed for light to heavy slurry service in the mining and mineral processing, power, pulp and paper, wastewater and chemical industries.
Knife Gate Valve Product
- Conventional
- Slurry
- Severe Service
Figure 952
Resilient & Metal Seated
- Size
- DN 50-600 (NPS 2-24)
- Pressure Rating
- 10 bar (145 psi)
Model SU10R
- Size
- DN 50-600 (NPS 2-24)
- Pressure Rating
- 10 bar (145 psi)
Model KGH
- Size
- DN 80-900 (NPS 3-36)
- Pressure Rating
- Up to 51 bar (740 psi)
Model KGF
- Size
- DN 80-900 (NPS 3-36)
- Pressure Rating
- Up to 20 bar (300 psi)
Figure PCS17
Perimeter Seal
- Size
- DN 50-750 (NPS 2-30)
- Pressure Rating
- Up to 10 bar (145 psi)
Model KGD
- Size
- DN 50-600 (NPS 2-24)
- Pressure Rating
- Up to 10 bar (145 psi)
Model KS1
- Size
- DN 50-750 (NPS 2-30)
- Pressure Rating
- ASME Class 150
Model KS3
- Size
- DN 80-750 (NPS 3-30)
- Pressure Rating
- ASME Class 300
Figure 955 / 956
Ported Slide Gate
- Size
- DN 50-600 (NPS 2-24)
- Pressure Rating
- 16 bar (232 psi)
Model KGA+
- Size
- DN 80-1500 (NPS 3-60)
- Pressure Rating
- Up to 6.9 bar (100 psi)
Electric, Pneumatic, Hydraulic
Actuator Product Series
| Type / Series | BIFFI | BETTIS |
|---|---|---|
| Multiturn Electric Actuator | ICON 3000 | XTE 3000, RTS |
| Quarter Turn Electric Actuator | F01, EFS3000 | HQ, SCE300 |
| Pneumatic Compact Design | FCBA / FCBB | CBA / CBB |
| Pneumatic Scotch Yoke/Piston | ALGA / ALGAS | G - SERIES |
| Hydraulic Actuator | OLGA / OLGAS | G - SERIES |
MULTI TURN ELECTRIC ACTUATOR
ICON 3000
- Torque
- 30 to 1440 Nm
- Voltages
- 24 VDC to 690 VAC
- Speed Range
- 12 to 173 RPM
BETTIS XTE 3000
- Torque
- Up to 57000 Nm
- Voltages
- 220 VAC to 660 VAC
- Speed Range
- 14 to 173 RPM
BETTIS RTS
- Torque
- 32 to 64 Nm
- Voltages
- 118 VAC to 480 VAC
- Speed Range
- 2.5 to 72 RPM
QUARTER TURN ELECTRIC ACTUATOR
F01 3000
- Torque
- 30 to 1440 Nm
- Voltages
- 110 VAC to 690 VAC
- Speed Range
- 12 to 173 RPM
EFS 3000
- Torque
- Up to 18000 Nm
- Voltages
- 110 VAC to 690 VAC
- Speed Range
- Configurable
SCE 300
- Torque
- 62 to 2000 Nm
- Voltages
- 24 VAC to 575 VAC
- Speed Range
- up to 180 sec/90°
PNEUMATIC COMPACT DESIGN
FCBA / FCBB
- Torque
- 835 to 2,492 Nm
- Supply pressure
- 3-11 Bar
- Supply medium
- Instrument Air / Natural gas
- Configuration
- Double Acting & Spring return
CBA 3000
- Torque
- 884 to 2,201 Nm
- Supply pressure
- 3-11 Bar
- Supply medium
- Instrument Air / Natural gas
- Configuration
- Double Acting & Spring return
PNEUMATIC SCOTCH AND YOKE PISTON
ALGA / ALGAS
- Torque
- Up to 750,000 Nm
- Supply pressure
- Up to 12 Barg
- Supply medium
- Air , Nitrogen, or sweet gas
- Configuration
- Double Acting & Spring return
G SERIES
- Torque
- Up to 100,000 Nm
- Supply pressure
- Up to 340 Barg
- Supply medium
- Instrument Air, Natural gas, Hydrolic Oil
- Configuration
- Double Acting & Spring return
HYDRAULIC ACTUATOR
OLGA/OLGAS H
- Torque
- Up to 750,000 Nm
- Supply medium
- Hydraulic Oil
- Configuration
- Double Acting & Spring return
G Series
- Torque
- Up to 678,000 Nm
- Supply medium
- Hydraulic Oil
- Configuration
- Double Acting & Spring return
PNEUMATIC ACTUATORS
A proven range of pneumatic actuators offering the options of rack and pinion, scotch yoke, helical slot and linear designs. Rack and pinion actuators provide the most economical on-off and modulating control for small to medium quarter-turn valves. The scotch yoke design creates high break-out torques making them suitable for quarter-turn valves up to the largest sizes. Helical slot is used when a reduced foot print impact is requested (it is available with a four-different output curves equivalent to R&P or SY).
MORIN B/C LOW
- Torque
- Up to 750,000 Nm
- Supply pressure
- Up to 15,820 Nm
- Supply medium
- Air , Gas
- Configuration
- Double Acting & Spring return
CBB SERIES
- Torque
- 835 – 1,182 Nm
- Supply pressure
- Up to 340 Barg
- Supply medium
- Pneumatic air / gas
- Configuration
- Double Acting & Spring return
RPD/ RPS SERIES
- Torque
- Up to 3700 Nm
- Supply pressure
- 3 - 12 barg
- Supply medium
- Air , Gas
- Configuration
- Double Acting & Spring return
M SERIES SS
- Torque
- Up to 13,560 Nm
- Supply pressure
- 3 – 11 barg
- Supply medium
- Air, Gas
- Configuration
- Double Acting & Spring return
HYDRAULIC ACTUATORS
A broad range of hydraulic actuators with a choice of rack and pinion, scotch yoke, helical slot and linear designs suitable for heavy-duty service in the harshest environmental and operating conditions. Rack and pinion actuators provide the most economical on-off and modulating control for small to medium quarter-turn valves. The scotch yoke design creates high break-out torques making them suitable for quarter-turn valves up to the largest sizes. Helical slot is used when a reduced foot print impact is requested (it is available with a four-different output curves equivalent to R&P or SY), including models for very high-pressure applications.
RPHD/ RPHS SERIES
- Torque
- Up to 2.600 Nm
- Supply medium
- Hydraulic Oil
- Configuration
- Double Acting & Spring return
GS Series
- Torque
- Up to 14,872 Nm
- Supply medium
- Hydraulic Oil
- Configuration
- Fail Safe & Spring return
MORIN HP
- Torque
- Up to 27.000 Nm
- Supply medium
- Hydraulic Oil
- Configuration
- Double Acting & Spring return
GH Series
- Torque
- Up to 678,000 Nm
- Supply medium
- High PressurePipelane Gas
- Configuration
- Fail Safe & Double Acting
ELECTRIC ACTUATORS
Electric actuators offer a zero-emission solution to your valve automation needs. With options suited for isolation valves and control valves, we offer actuation solutions designed for a range of valve sizes and duty cycles. Our current product portfolio has evolved from innovative technologies developed by the Bettis™
M2CP
- Torque
- 176 – 21,693 Nm
- Voltages
- 115 VAC to 690 VAC
- Speed Range
- 5 to 144 RPM
TORQPLUS
- Torque
- 11 – 2,260 Nm
- Voltages
- 115 VAC to 460 VAC
- Speed Range
- 2 to 90 sec/90°
Inquiry
Not sure which Emerson family fits your duty?
Send us the medium, pressure, temperature and line size, and we will come back with the options across the range.